Showing posts with label #whiteembossingpowder. Show all posts
Showing posts with label #whiteembossingpowder. Show all posts

Wednesday, 18 September 2024

Watercolour Wednesday - Christmas Friends

I really had great fun with today's watercolour card! I started with a piece of Fluid 100 Watercolour Card 12.5 cm by 9cm, I knew it was going to be much smaller than a C6 mat and that was fine. Using Versamark ink, I stamped the reindeer from the Christmas Friends stamp set onto the card using my stamp positioner. I inked it up a few times to make sure that the ink was all over. I then poured white embossing powder and heat set it using my heat tool. Then using a watercolour tray, I added some drops of Reinker in 4 different colours and watered each colour well. Then starting with the blue of Balmy Blue, I brushed the colour several times across the piece of card. Then the pink of Bubble Bath, orange of Calypso Coral and finally yellow of Daffodil Delight. The reindeer looked cool but I wanted him to look more realistic. Using the Calypso Coral, watered down ink, I added some of the ink onto the reindeer and the pink of the bubble bath for his skates. I really just played and enjoyed the crazy result too. 

Once it was dry, I added it to a Calypso Coral mat and then onto Balmy Blue card. Inside the white mat was added to Balmy Blue mat and adhered inside the white card base. I stamped the Owl on the inside of the card and coloured in using my Stampin' Blends pens.

 

stampin up 2 big girls crafting fluid 100 watercolour paper christmas friends, reindeer owl polar bear mouse heat embossing

stampin up 2 big girls crafting fluid 100 watercolour paper christmas friends, reindeer owl polar bear mouse heat embossing

stampin up 2 big girls crafting fluid 100 watercolour paper christmas friends, reindeer owl polar bear mouse heat embossing

stampin up 2 big girls crafting fluid 100 watercolour paper christmas friends, reindeer owl polar bear mouse heat embossing

 

Thursday, 24 August 2023

This or That Thursday - Backgrounds - It's In The Stars

 Hello, thank you for stopping by. Today for my first card, I stamped the image from It's in the Stars using Versamark Ink pad onto a piece of A5 white card. Once done, I turned the card around and then repeated it across the other side of the card. I poured White Embossing Powder across the whole sheet and then heat set it. Using a Blending Brush I coloured the white card using Starry Sky ink. I didn't want it too dark so was very careful how I applied it. Once complete, I used a tissue to rub over the stars well to make them shine. Using the In The Moment stamp set, I stamped one of the images and coloured it using my blends pens. Then I did as I always like to do and fussy cut it all out. I stamped and added some sentiments and completed the THIS card. 

THIS AND THAT




 
THAT

My next card is using the other half of the blue sky and stars. This time I have die cut some of the Cheerful Daisies and pieced them altogether. I added a few of the fine leaves behind them, some sentiments later and the THAT card is complete too.
 
 






Tuesday, 2 May 2023

Technique Tuesday - Dainty Delight

 Hello again and thank you for stopping by. Today's card is another simple one with a little blending and heat embossing. I started with a strip of card and using Versamark Ink pad, I stamped 3 of the stamps from the set Dainty Delight and poured White Embossing Powder over. Once I had removed the excess powder, I heat set it. Using my blending brushes, I brushed the NEW ink called Lemon Lolly over the top third. Then Fresh Freesia on the centre third. Fresh Freesia is now a permanent fixture in the catalogue. It was an In Colour for the last 2 years but it is now staying. Then last but not least, I used Granny Apple Green ink and brushed it over the bottom third. That's it really except for the Fresh Freesia card base which I embossed using the Fern fry embossing folder.






Tuesday, 10 January 2023

Technique Tuesday - Dainty Delight

 Hello and thank you for stopping by. I have changed tack on what I was using for this week as I had forgotten that Cary used the Beautifully Happy stamp set a few weeks ago. I really paid attention didn't I Anyway I am now for the rest of this week, going to use the gorgeous Dainty Delight stamp set.

 Today's card is lovely and bright then cut into 4 pieces. I stamped several of the flowers from the stamp set using Versamark and added them to a white mat. I used White embossing powder and heat set them before I started to blend several different colours across the sheet. I cut it into 2 strips then each one into 2 more pieces. That was it. From there I added the pieces to another mat in a different order to before and then adhered them onto a Granny Apple Green card base. 





Wednesday, 2 November 2022

Watercolour Wednesday - Santa's Delivery

Well, I have discovered that I cannot for the life of me, watercolour Santa and his train! I tried 4 times and eventually gave up! So back to the drawing board and I made a background. Using the Fluid 100 watercolour paper and 3 drops of the pale blue of Balmy Blue ink refil into a tablespoon of water, I mixed it up then washed it across the paper and let it dry. Then I added some Orchid Oasis ink refil, a soft purple and mixed that into the blue and washed that across the top portion of the card and let that dry. Once that was dry I then went on to use the Starry Sky ink refil. I repeated the same process with only a few drops of the refil but added it to the previously coloured water. That was also washed across the whole of the paper and again left to dry. 

I decided to add a sky full of snowflakes to the now dry mat. Using Versamark, I stamped the snowflake stamp from the Christmas Scottie stamp set all over the blue paper and poured some white embossing powder all over before I heat set it. Once done, I added the Santa's train over the top. As I had such a disaster with my colouring the train, I used the Blends pens to colour it all in. A sentiment at an angle and this card is completed.






Friday, 3 June 2022

Fun Fold Friday - Wisteria Wishes

For the last card this week, I have made a very special one. This is for a very dear friends birthday next week. Using Wisteria Wishes stamp set I stamped the sentiment onto a white mat. The rest that I used was DSP, (Designer Series Paper) and the Wisteria Dies. I have made a gatefold which has another gatefold over the top edge. 

I used Basic white thick A4 card and cut it lengthwise at 14.85cm by 29.7cm so a long rectangle. I scored at 4.95cm and 9.9cm from each side. I prefer to do that than measure along the whole length of the card. Holding the 2 centre panels together, I creased and burnished the folds well. From left to right of the card you should have a mountain fold, valley fold, valley fold and lastly another mountain fold.

  

The piece of card that is cut from the original piece of A4 you will need to score and fold with the same measurements. I chose to die cut my border with the Basic Borders dies. There is a cloud edging die which I love. From there, I started to cover the card in DSP. My choice was the beautiful pack of Sun Prints DSP.

I chose a dark blue on the bottom right of the picture below which just has some white images along the bottom and part of 1 edge. The 2 panels for the very front were 14.4cm by 4.75cm, I repeated the measurements for the inner 2 pieces and used the reverse of the same patterned paper. The centre panel was part of the remaining plain, dark blue from above the white pattern.  

SUN PRINTS 12” X 12” (30.5 X 30.5 CM) DESIGNER SERIES PAPER

Once the DSP was added to the card base, I added the white border across the top and reversed the folds to be valley fold, mountain fold, mountain fold and valley fold. Once that was secured I added the Granny Apple Green leaves across it using Tombow Multipurpose Glue. I pieced the Wisteria pieces together using Dimensionals, foam shapes to give some more dimension.


I stamped Happy Birthday from the Go To Greetings stamp set in Versamark ink and poured white embossing powder across it before heat setting.

You can now see the shape of the card when the top panel is reversed. 

That's it once again from me for another week. Cary will be back next week to share her creations. 
 
Until I get back, please take care, stay safe and well. 
 
As always though... KEEP ON CRAFTING!!

Thank you so much for stopping by,
 
xxx Gill xxx



Wednesday, 6 October 2021

Watercolour Wednesday - Peaceful Deer

 Today's card is one that I had great fun making. a little fiddly but it was great fun to make. I started with a piece of White card and took a large acrylic block and stamped it onto the soft blue of Balmy Blue. This enabled me to get lots of ink onto the block. Using the large waterbrush in the set, I dropped a few drops of water onto the ink on the block....picking up the ink with the brush I literally spread it from the outside of the white card mat to the centre from left to right and repeated it until I had the colour that I was happy with. Yes, I could have used a piece of Balmy Blue card, but there wasn't any mixed texture showing on the mat which I have now.

For more information on the products that I used on this card, please click on the link HERE and it will open a new page for you. 

 

I took a piece of the Stampin' Up! white velvet paper and cut to half a C6 mat then ripped the edges of it to soften it and make it into the background. Stamping the deer and trees onto scrap white card then using Stampin' Blends, I coloured them in. 


Yes, it had to be done. I fussy cut the trees and deer. I then fixed them onto the card using dimensionals to add more texture. A piece of the cotton ribbon and a message inside and out completes this card.





Tuesday, 5 October 2021

Tips, Tricks and Techniques Tuesday - Peaceful Deer

 For today's card using the Peaceful Deer stamp set, I have used one of my favourite simple techniques and that is Heat embossing. It is so simple to do as long as you have the heat embossing tool, embossing powder and ink pad such as the amazing Versamark. This is really an upgrade of the card I made for yesterday's Make It Monday or #simplestamping project. I have used another of my favourite techniques called matting and layering. I love the layers on a card as it always adds dimension to any card. 

My first action was to use the embossing buddy (a very fine powder to clean up finger prints from the card) and wiped it across the whole of the card that I was going to ink onto. Instead of using the Memento ink pad as I did yesterday, today I used the Versamark ink pad and stamped the deer first and then the stars repeatedly over the upper half of the card. Versamark is Watermark stamp pad and will stay wet for quite a while, even a day or so! Once stamped all over, I poured white Embossing Powder over the wet ink and then heat set it using the Heat tool. It literally takes less than 30 seconds to heat set all of that powder. Watching it change from very dull greyish-white to the shiny white is AMAZING!!! I love it! I stamped a further deer onto the blue card scrap in the same way and once heat-set I punched it out using the matching punch that goes with the stamp set.

I used the Misty Moonlight card and Basic white once again keeping to my monochrome look again. A strip of the gorgeous cotton ribbon, loads of Rhinestones (a big change for me) and a few messages, completes this card for today.  

For more information on the products that I have used today, please click HERE The link will open up in a new window for you.